[求助]用ZEMAX计算光纤的耦合效率 [复制链接]

我用ZEMAX计算光纤的耦合效率，可是我发现当接收光纤的数值孔径增大时耦合效率反而降低了，这是怎么回事呢？

我也想知道，同问，呵呵

我是新手也想知道对于光耦合的问题

有没有这方面的书籍？

我也想知道

System Efficiency              :      0.999138 =X[]0.I%  
zdFO&YHTw  
Receiver Efficiency            :      0.945327 7U>Xi'?  
DT`TA#O  
Coupling Efficiency            :      0.944512 (-0.2479 dB) @:\Iw"P  
>58N P1[k  
Maximum Efficiency              :      0.995227 68 %= V>V  
F+mn d,3  
The system efficiency is the fraction of the energy in the source 9MQ!5Zn  
beam that exits the optical system. This value is determined by &~of]A  
the input na, entrance pupil size and position, apodization, N
t]YhO  
transmission of the optics, and vignetting. r>4HF"Nm  
YqhZndktX  
The receiver efficiency is the fraction of the transmitted energy dWbSrl  
that couples from the exit pupil to the receiving fiber. This (_h<<`@B  
value is determined by aberrations and the na of the receiving fiber. DPCB=2E  
J jRz<T;  
The coupling efficiency is the fraction of energy radiated #@s[!4)_I  
by the source that couples into the receiver. This is the n1+1/  
product of the system and receiver efficiencies. -`nQa$N-  
.{[+d3+,  
The maximum efficiency is the coupling efficiency if there -FRMal4Pg0  
were no aberrations. HBHDu;u  
*->2$uWP  
数值孔径不是越大越好呀,当耦合光学系统的模式与你光线的模式完全匹配时,耦合效率最大. ZbVo<p5* ]  
耦合效率的计算有一个积分过程,还是比较复杂的.

            

能否请问五楼的大侠怎么做到的，谢谢啊~~335797507@qq.com

谢谢  学学

我也想知道