[求助]运行时出错，各位大侠帮忙啊！ [复制链接]

我在模拟出光时发生很多错误 jATI&oX  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 3183. 4!$s}V=
6  
   Ray 198, level 68 terminated at (0.308833 0.183908 0.075) U QE qX  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 2343. N03G>fZ  
   Ray 736, level 43 terminated at (0.175985 0.13324 0.075) 6W@UJx}w5  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 2125. & +4gSr  
   Ray 1134, level 82 terminated at (0.103098 0.0474212 0.075) ^?$W
VB  
Error: sapphire and N are overlapping at coincident surfaces Surface 0 and Surface 1600. `IOs-%s  
   Ray 2133, level 186 terminated at (0.12514 0.0239743 0.075) lW<PoT  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 1393. m7&O9?X  
   Ray 2439, level 72 terminated at (0.0141109 0.0510759 0.075) -yR.<
KnL  
C(S'#cm  
貌似是说界面有问题，光线被终结了， OF%B[h&   
是不是TRACEPRO对两个物体的界面有特殊的定义啊。求各位大侠帮帮解答下

两个物体面已相交了

实体间有重合,TracePro模拟时是不允许的,因为你在真实世界中也没有两个物体能重合在一起的.

修改一下模型吧。