[求助]运行时出错，各位大侠帮忙啊！ [复制链接]

我在模拟出光时发生很多错误 f/RzE  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 3183. -hw^3Af  
   Ray 198, level 68 terminated at (0.308833 0.183908 0.075) A;n3""  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 2343. 0gw0  
   Ray 736, level 43 terminated at (0.175985 0.13324 0.075) :@{(^}N8u  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 2125. &{NN!X  
   Ray 1134, level 82 terminated at (0.103098 0.0474212 0.075) -jdS8n4  
Error: sapphire and N are overlapping at coincident surfaces Surface 0 and Surface 1600. X&fM36o7  
   Ray 2133, level 186 terminated at (0.12514 0.0239743 0.075) St9W{  
Error: sapphire and cone are overlapping at coincident surfaces Surface 0 and Surface 1393. fqA\Rp6Z  
   Ray 2439, level 72 terminated at (0.0141109 0.0510759 0.075) p'fq&a+  
_0ki19rs  
貌似是说界面有问题，光线被终结了， 3maiBAOKz  
是不是TRACEPRO对两个物体的界面有特殊的定义啊。求各位大侠帮帮解答下

修改一下模型吧。

实体间有重合,TracePro模拟时是不允许的,因为你在真实世界中也没有两个物体能重合在一起的.

两个物体面已相交了