我也不清楚，这是从帮助里面抄过来的 ZbiC=uh
3dz{" hV
Focus Merit Function Target Tab zB`J+r;LU
This tab contains diagnostic data that can help you improve your optimization. /Xj{]i 3{
• Focus To Yecdw'BW?
5t-d+vB
– Receiver Center - This is the default setting for the Focus merit function. Focuses to the center of the receiver (which is X, Y = 0, 0 by default). QW'*^^
ePZ Ai"k
– Rays Centroid - Focuses to the centroids of X and Y. Use this option when the final location for the rays in unknown prior to optimization. E7i/ gY
KwV!smi2
– Line Along X - Focuses rays along the X axis at the location specified by the value for Y. JB%_&gX)v
w2! :>8o:
– Line Along Y - Focuses rays along the Y axis at the location specified by the value for X. j\wZjc-j
G)^/#d#&
– Position - Focuses to the position specified by X, Y, below. -[J4nN &N
bHcBjk.\
– Ring - Focuses rays to an annulus (i.e., a ring) with the specified radius. The radius of a given ray, R, is computed using R = SQRT(X2+Y2). C:t?HLY)fG
}t"K(oamm
• X, Y - The X, Y target position. dGj0;3FI%
+8W5amk.P|
• Radius - The radius value for the ring when the target is Focus To Ring. 2D:,(
w >%^pO~}`
;
wxmSX9
r *8a!jm?
重点优点功能目标选项卡 dl3;A_ 2
此选项卡包含可帮助您改进优化的诊断数据。 -T;^T1
• 专注于 3.Yg3&"Z
– 接收器中心 - 这是 Focus 评价功能的默认设置。 聚焦到接收器的中心（默认为 X, Y = 0, 0）。 ZXL'R | ?
– 光线质心 - 聚焦于 X 和 Y 的质心。当光线的最终位置在优化之前未知时使用此选项。 {]U
\HE1w
– 沿 X 线 - 沿 X 轴将光线聚焦在 Y 值指定的位置。 ~ES%=if~Y
– 沿 Y 线 - 沿 Y 轴将光线聚焦在 X 值指定的位置。 %I9f_5BlT8
– 位置 - 聚焦到下方 X、Y 指定的位置。 vNs` Uk A
– 环 - 将光线聚焦到具有指定半径的环形（即环）。 使用 R = SQRT(X2+Y2) 计算给定射线的半径 R。 F+*fim'NK
• X、Y - X、Y 目标位置。 `&.qHw)
• 半径- 当目标为Focus To Ring 时，环的半径值。 (,t[`z
