蕴藉之身:没有NSDD的说明哦
(2013-05-16 17:07) 
J_v$YwE
WUsKnf Non-sequential incoherent intensity data. Surf defines the surface number of the NSC group
52,m:EhL (always 1 in pure NSC systems). Det# refers to the object number of the desired detector. If Det#
7 El[ > is zero, then all detectors are cleared. If Det# is less than zero, then the detector defined by the
vOc 9ZE absolute value of Det# only is cleared.
0#S W! b|% For Detector Rectangles, Detector Surfaces, and all faceted detectors: If Pix# is a positive integer
T<w5vqFDu greater than zero, then the data from the specified pixel is returned. Otherwise, the following data
g;8jK 8 Kh is returned depending upon the value of Pix#:
$W9{P; 0: Sum of the total flux in position space, average flux/area in position space, or total flux in angle
?hWwj6i& space for all pixels for that detector object, for Data = 0, 1, or 2, respectively.
D6G oa(!9d -1: Maximum flux or flux/area.
c(n&A~*AJ% -2: Minimum flux or flux/area.
u( wGl_ -3: Number of rays striking the detector.
P5#r,:zL -4: Standard deviation (RMS from the mean) of all the non-zero pixel data.
Xp8]qH|K -5: The mean value of all the non-zero pixel data.
r.>].~}4 -6, -7, -8: The x, y, or z coordinate of the position or angle Irradiance or Intensity centroid,
r;Gi+Ca5 respectively.
(s7;^)}z x -9,-10, -11, -12: The RMS radius, x, y, or z distance or angle of all the pixel data with respect to the
EVVP]ND centroid.
q&/Yg,p\ Data is 0 for flux, 1 for flux/area, and 2 for flux/solid angle pixel. Only values 0 and 1 (for flux and
\7l-@6 '7 flux/area) are supported for faceted detectors. See “Optimizing with sources and detectors in nonsequential
g)_e]& mode” on page 502 for complete details.
