Allow me to repost here for depth/frequency setting 1xC`ZhjcD
The main fresnel lens types are: p {C9`wi)
/2w@K_Px6
* Constant groove depth. %cj58zO|y
* Contant groove pitch types. W8*
2;F]
8ui=2k(
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. JK^[{1
JI
Ar`\ N1a
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. #:
hVF/
Tk+DPp^
For conic: check conic section using Wikipedia and you should see what conic constant means. 3]S`|#J
BTs0o&}e
9.-47|-9C