Allow me to repost here for depth/frequency setting ,H1j&]E!
The main fresnel lens types are: 2|kx:^D p
>j_,3{eJ
* Constant groove depth. n4qj"x Q
* Contant groove pitch types. X@5!I+u\L
5A Vo#}&\
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. AAxY {Z-4
4 )*8 &
For radius, this is the curvature of the base surface. If you define one such lens and chaneg the radius and you shall see what it means. A graphic tells lounder than words. * pyi;
%#yCp2
For conic: check conic section using Wikipedia and you should see what conic constant means. W$v5o9\Px
G?8LYg!-
'h.{fKG]ME
