I guess the main confusion of defining this lens is probably the setting of depth/frequency. _ ] veTAV
Oe=7z'o
The main fresnel lens types are: { j.5!Nj]B
! 8M]n
* Constant groove depth. E9t[M b %0
* Contant groove pitch types. Gb.r! W8
|T0jq
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. ^2}0lP|
.~qu,q7k~
Hope this helps!!
