I guess the main confusion of defining this lens is probably the setting of depth/frequency. ?OD43y1rzd
0[L)`7
The main fresnel lens types are: ZlEQzL~
J) I| Xot
* Constant groove depth. L@VIC|~E
* Contant groove pitch types. 2,T^L (]
BU;o$"L
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. tMbr acm
e]5
n4"]D)
Hope this helps!!
