I guess the main confusion of defining this lens is probably the setting of depth/frequency. -4_$ln w$
e.V:)7Uc
The main fresnel lens types are: O/(xj2~$ J
tT?cBg{
* Constant groove depth. `$ aZ0+
* Contant groove pitch types. jPW#(3hoE
R`^_(y n>
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. _/5H l`
Aj+F
|l
Hope this helps!!
