[求助]请教：Tracepro中照度图选项中选择归一化和不选择归一化选项有什么区别？ [复制链接]

在Tracepro的照度图选项中有一项“Normalize to emitted flux”，选择和不选择的情况出来的照度图有什么区别？哪位能详细解答一下。 6'Sq|@VOi  

说明书：规范从所有发光源发出的所有出射通量给图的数据，这个选项允许你使通量和光照规范为总共的通量，如果这个框被选中后，TracePro在光照度图中使用出色通量来除以总通量。这对于在光学系统计算的系统透射率和照明系统中计算发光效率，会非常有用。 &YpWfY&V  
也就是说，比如你的总光源有10lm，得出的照度图在没有选择norm～选项的时候是显示正常的照度，在勾选了之后显示的照度值是原来的/总流明，可以认为是没流明所产生的照度值

谢谢版主的耐心解答，^_^

suezl9 U#gv ~)\k  
哈哈

有中文说明书么？可以共享一下么？

Normalize ZNjqH[  
Normalize the map data to the total emitted flux from all sources. ZnXq+^Z4  
This option allows you to have the flux and irradiance normalized to the total Y:3\z?oV[  
emitted flux. When this box is checked, TracePro divides the values in the m L,
El2  
irradiance map and the total flux by the emitted flux. This is especially useful for maINp"#  
calculating system transmittance for an optical system, or lighting efficiency for a <CM}g4Y  
lighting calculation. 9xZ?}S:d  
Example 1: System Transmittance C+<z;9`  
Suppose you need to calculate the system transmittance of an optical system. rxM)SC;P  
You would probably use the grid raytrace option, and the emitted flux is equal to +`$[h2Z=:  
the sum of the flux in all the emitted rays. When you display an irradiance map, I]B[H6  
the system transmittance is equal to the total flux, displayed at the bottom of the KRN{Ath.  
irradiance map window, divided by the emitted flux. To get the system h 1`yW#%  
transmittance, check the Normalize to emitted flux box and press the Apply |@lVFEl]  
button. The map will be redisplayed, and the Normalized Flux value will be equal U.0bbr  
to the system transmittance. vo3[)BDbT  
Example 2: Lighting Efficiency WC ZDS>  
Suppose you need to calculate the lighting efficiency of a luminaire in illuminating VQ]MJjvb  
a plane. You would probably choose the Surface Source raytrace option, and the ckg8x&Z  
emitted flux is equal to the flux you specified when you defined the sources. When i
T}L9\  
you display an irradiance map, the total flux incident on the observation plane is O,A}p:Pgs  
displayed at the bottom of the window. The lighting efficiency is equal to the total AQe~F  
flux divided by the emitted flux. To get the lighting efficiency directly, check the {I~[a#^  
Normalize to emitted flux box and press the Apply button. The map will be J"W+9sI0  
redisplayed, and the Normalized Flux value will be equal to the lighting efficiency q1O}dSPwX  
of the luminaire.

可以看成均匀性吗？