for core版本,在桌面快捷方式当中要修改启动路径,是这样的 .k ! 2{A
"C:\Program Files\ANSYS Inc\v202\Optical Products\SPEOS for Creo Parametric\SPE.bat" "CREO5.0" "C:\Program Files\PTC\Creo 5.0.0.0\Parametric\bin\parametric.exe" dt<P6pK-
所以,学着这个方案,把for NX 12版本的桌面快捷方式启动路径修改成如下这样 $9Xn.,W
"C:\Program Files\ANSYS Inc\v202\Optical Products\SPEOS for NX\SpeosForNx_StartUp.bat" "NX 12.0" "C:\Program Files\Siemens\NX 12.0\NXBIN\ugraf.exe" 1F2(MKOo!
按这个方法启动不了. speosfornx_startup.bat这个文件当中,查了一下里面的内容,又有SNX.BAT这件描述,所以又把speosfornx_startup这个名称改成SNX.BAT,上面路径当中的名称也改成SNX.BAT这个名字,但是还是启动不了啊. 于是继续找,NX12.0的路径在NXBIN文件夹下,于是把里面的GUII的都改成了NXBIN路径,但是也是不行啊. KlwB oC/{K
启动桌面快捷方式,如提示下 / (s N@kt
Third argument is required {FN4BC`3+
Launcher SPEOS for NX Application VF<VyWFC0`
Usage: J6z U#
SpeosForNx_StartUp.bat SPEOSVersion [NXExePath] [SPEOSforNXDir] \)g}
!.|A}8nK
With: q (#,X~0
SPEOSVersion: Describe the version of SPEOS for NX application. UD2 l!)rW
Could be 8.0 for Siemens NX 8.0 version 2 XjH 1
8.5 for Siemens NX 8.5 version gHWsKE
%
9.0 for Siemens NX 9.0 version P!&yYR\
10.0 for Siemens NX 10.0 version E.x<J.[Y
11.0 for Siemens NX 11.0 version U'} [:h~)
12.0 for Siemens NX 12.0 version
| gGD3H
1847 for Siemens NX 1847 version qs
(L2'7 /
niPqzi
NXExePath: The path to the ugraf.exe file. /5f=a
By default C:\Program Files\Siemens\NX 8.0\UGII ]e? L,1-
if SPEOSVersion is 8.0 E,A9+OKxJ
C:\Program Files\Siemens\NX 8.5\UGII "t>H
B6^
if SPEOSVersion is 8.5 sg<c 1
C:\Program Files\Siemens\NX 9.0\UGII / EVXkf0
if SPEOSVersion is 9.0 /XuOv(j
C:\Program Files\Siemens\NX 10.0\UGII ae+*gkPv8
if SPEOSVersion is 10.0 ]#FQde4]5
C:\Program Files\Siemens\NX 11.0\NXBIN 2<_| 1%C
if SPEOSVersion is 11.0 7"])Y
C:\Program Files\Siemens\NX 12.0\NXBIN (6)X Fp&
if SPEOSVersion is 12.0 q:,ck@-4
C:\Program Files\Siemens\NX 1847\NXBIN e= ",58
if SPEOSVersion is 1847 *.-qbwOg
3pkx3tp{
SPEOSforNXDir: Define the path where SPEOS for NX has been installed }~ga86:n0
By default C:\Users\Administrator\Documents xHn "D@
1(a+ |
kl5Y{
