切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • Zemax光学设计从入门到精通 Zemax光学设计从基础到实践 Zemax光学设计实践基础(陈家璧) ZEMAX光学系统设计实战
    讯技光电:VirtualLab Fusion独家供应商 光学设计与光学元件 CODE V,LightTools,RSoft,LucidShape 计算光学带来的成像革命
    发帖 回复
    返回列表
    • 2340阅读
    • 1回复

    [原创]SYNOPSYS™15.51 版本发布 [复制链接]

    		 上一主题 下一主题
    离线optics1210
    助理工程师
     
    发帖
    476
    光币
    331
    光券
    0
    只看楼主 正序阅读 楼主  发表于: 2019-01-18
    The update to version 15.51 incorporates the following changes: j:48l[;ed  
    Yu[MNX ;G  
    Features: O#8lJ%?  
    1.  DSEARCH now has a FILTER directive, which lets you specify that certain elements should be either positive or negative, while the others can be either.  If you know what a portion of your lens should look like, you can specify it this way -- and shorten the search time by a factor of two for each element so declared. \\oa[nvL~  
    2.  SYNOPSYS now has a STEP file converter.  There are limitations, however, which you can read about in the UM. o {q8An)  
    -4J.YF>  
    Bugs Fixed: `X&d:!}F  
    1.  The sequence IFR ... / IFP ... did not work if COMMON was requested. #~|esr/wf  
    2.  ARG did not work properly with plastic elements. La7}zXx  
    3.  Index values varied with GLM did not let the value of Nd rise above 1.9, even if you specified a higher limit with the CUL and FUL directives. V+|$H h8  
    [ 此帖被optics1210在2019-01-20 11:31重新编辑 ]
     
    回复
    举报
    分享到
    离线optics1210
    助理工程师
    发帖
    476
    光币
    331
    光券
    0
    只看该作者 1楼 发表于: 2019-01-20
    每一个新版可以实时加入客户要求的功能，反馈过程大约24小时左右，加入功能从一周到几周不等。
    回复
    举报
    发帖 回复
    返回列表