我也不清楚,这是从帮助里面抄过来的 v(h
_d %H;<_
Focus Merit Function Target Tab 'WxcA)z0cQ
This tab contains diagnostic data that can help you improve your optimization. =WFMqBh<`
• Focus To i^Ep[3
Mm^o3vl
– Receiver Center - This is the default setting for the Focus merit function. Focuses to the center of the receiver (which is X, Y = 0, 0 by default). ^|>vK,q$I
K}&|lCsb
– Rays Centroid - Focuses to the centroids of X and Y. Use this option when the final location for the rays in unknown prior to optimization. ASR"<]
oBifESJ
– Line Along X - Focuses rays along the X axis at the location specified by the value for Y. ]{.rx),
;IXDZ#;
– Line Along Y - Focuses rays along the Y axis at the location specified by the value for X. N/qr}-
3z
`[VoW2CLH+
– Position - Focuses to the position specified by X, Y, below. y5BNHweaRb
D0lgKQ
– Ring - Focuses rays to an annulus (i.e., a ring) with the specified radius. The radius of a given ray, R, is computed using R = SQRT(X2+Y2). 6$9n_AS
^qS[2Dy
• X, Y - The X, Y target position. psgXJe$
#N[nvIi}
• Radius - The radius value for the ring when the target is Focus To Ring. T AwA)Zg
w[~$.FM/
l?pZdAE
x AkM_<
重点优点功能目标选项卡 K$R1x1lc2
此选项卡包含可帮助您改进优化的诊断数据。 ~y$B#.l
• 专注于 @Zjy"u
– 接收器中心 - 这是 Focus 评价功能的默认设置。 聚焦到接收器的中心(默认为 X, Y = 0, 0)。 J0C,KU(
– 光线质心 - 聚焦于 X 和 Y 的质心。当光线的最终位置在优化之前未知时使用此选项。 b H?dyS6Bx
– 沿 X 线 - 沿 X 轴将光线聚焦在 Y 值指定的位置。 &r/a\t,8n
– 沿 Y 线 - 沿 Y 轴将光线聚焦在 X 值指定的位置。 ;oH%d;H
– 位置 - 聚焦到下方 X、Y 指定的位置。 .FXq4who
– 环 - 将光线聚焦到具有指定半径的环形(即环)。 使用 R = SQRT(X2+Y2) 计算给定射线的半径 R。 >|XQfavE
• X、Y - X、Y 目标位置。 ]Tx8ImD#)A
• 半径- 当目标为Focus To Ring 时,环的半径值。 HZkC3$