最近看一个ZEMAX的实例,是关于double Gauss设计的,是直接打开ZEMAX中sample中的sc-dblgauss1.zmx。 V_p[mSKJv
这个例子中设计的一个用的是35mm的胶卷。 f tE2@}
然后,下面说道setup the fields: io^L[
35mm film is 长方形的:24*36mm, (W'.vEl
对角线长为43.3mm,将其作为normalized filed的直径,则semi-FOV的高度是43.3/2=21.7mm k 3S
接着,题目中说:remember, the normalized weightings for 4 field positions(use paraxial dw"{inMf
image height )are: lU&[){
0,0.58,0.82,1 ;I@@PUnR
multiply the normalized weightings by the HFOV height ~+OAAkJ9
?Q#yf8
[:*Jn}
我是新人,我想问一下:①以这道题为例,在field data 中type选用paraxial image height时,下面的field normalized选什么,还有下面的数据怎么填;②是否可以不用paraxial image data,而是使用Angle(Deg)这一项,如果可以的话,下面以该怎么填。 =QQTHL{3
另外,题中条件75mm focal length;F/3