I guess the main confusion of defining this lens is probably the setting of depth/frequency. "
H\k`.j
=7eV/3
The main fresnel lens types are: ~]2K^bh8&
iYy1!\
* Constant groove depth. 26h21Z16q
* Contant groove pitch types. F )eelPZ+,
4kx
N<]
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length.
;i+jJ4
j#ab_3xH
Hope this helps!!