I guess the main confusion of defining this lens is probably the setting of depth/frequency. 53 -O wjpx
q}!h(-y}5n
The main fresnel lens types are: 9w~S zpJ%
u HW'F(;
* Constant groove depth. [N12 X7O3
* Contant groove pitch types. :yRv:`r3Lt
oKCv$>Y
So if your depth is fixed you will define +ve value in the cell and to specify the "height" or "depth" of each groove feature. If the frequency of the groove is fixed then you use -ve value. Say putting down - 5 this implies that there are 5 grooves with a unit length. \2]_NU5.
ITg<u?z_
Hope this helps!!
