最近看一个ZEMAX的实例,是关于double Gauss设计的,是直接打开ZEMAX中sample中的sc-dblgauss1.zmx。 f"0?_cG{%
这个例子中设计的一个用的是35mm的胶卷。 mI-9=6T_
然后,下面说道setup the fields: v?`DP
35mm film is 长方形的:24*36mm, *&~wl(+O=
对角线长为43.3mm,将其作为normalized filed的直径,则semi-FOV的高度是43.3/2=21.7mm oE'Flc.
接着,题目中说:remember, the normalized weightings for 4 field positions(use paraxial Qk`LBvg1
image height )are: \* SEj&9
0,0.58,0.82,1 KN"<f:u
multiply the normalized weightings by the HFOV height u]s}@(+.
6:qh%ZR
0'~Iv\s
我是新人,我想问一下:①以这道题为例,在field data 中type选用paraxial image height时,下面的field normalized选什么,还有下面的数据怎么填;②是否可以不用paraxial image data,而是使用Angle(Deg)这一项,如果可以的话,下面以该怎么填。 Yo[Pu< zR
另外,题中条件75mm focal length;F/3