一、特种,精密零部件加工
MwbXZb{#"= Special, precision parts machining
/j46`F Praezisionssonderteile Anfertigung
`Y>'*4a\ m:&go2Y uF,F<%d ★ 超微超深细孔加工:可在金属上加工0.1mm以上的细孔,深度达到1mm(Ø.05mm).
sG{f xha Manufacture capability of ultra-fine and ultra-deep for small bores: can machine holes with dia over 0.1mm, depth 1mm.
L/\s~*:M Herstellung von Feinstbohrunegn 0,1mm
ZOJ<^t} 5My4a9 ★ 五轴连动加工(瑞士米克朗).
@+Ch2Lod 5-axis continuum machining(Switzerland MIKRON)
vZMb/}-o 5-Achs Bearbeitungen auf Schweizer Prazisionsmaschinen
c\A
4-08 C.qNBl* ★ 超细电极慢走丝线切割:瑞士阿奇夏米尔线切割,最细电极丝达到0.03mm,可进行超高光洁度(达到0.1μ),超细清角(最小尖角达到0.025mm)线切割加工.
UMtnb:ek Ultra thin slow wire-cutting: Switzerland Agie Charmilles wire-cut, withthe thinnest 0.03mm, also capable of machining ultra-fine finish (0.1μ) and ultra-sharp angle (smallest 0.025mm).
gQ90>P: Drahterodierarbeiten jeder Art auf Schweizer Praezisionsdrahterodiermaschinen
o;#:% x*>@knP<- ★ 钨钢(硬质合金)成形加工:钨钢成型磨削、外园磨削.
hOFC8 g Tungsten steel (hard alloy) forming machining: tungsten forming grinding,cylindrical grinding.
4z<nJOEh[ Hartmetallbearbeitungen
>TI/W~M e1cqzhI=nA XhEZTg; ★ 精密外园磨削:超长、超细轴磨削,尺寸精度达到2μ,同轴跳动2μ以内.
B&