?"$W=*P\o
请问大家下面这段代码中setnamed命令中的几个分别代表什么意思啊?脚本运行的时候发现半径为0.25μm时可以正常运行,但为0.75μm的时候出现一个错误: Sd2R$r
Warning: in run: there was no simulation data. The simulation failed to run. yb2*K+Kv
Error: Can not find result 'E' in the result provider 'field' VjS %!P
代码如下: s<cg&`u,<M
radius = 1e-6*[0.25,0.75]; !u.{<51b
for (i=1:length(radius)) { Hv>A$x$q
setnamed("::model","radius",radius(i)); hV;Tm7I2
run; "!i7U2M'
E = getresult("field","E"); p#HPWW"
x = E.x; pv+FPB
z = E.z; <T[%03
Ex = E.Ex; 5YUn{qtD
image(x*1e6,z*1e6,pinch(real(Ex)),"x (um)","z (um)","Real(Ex) - "+num2str(radius(i)*1e6)+" um"); f&bY=$iff
switchtolayout; j01.`G7Q
}