mP[Z lS~"
请问大家下面这段代码中setnamed命令中的几个分别代表什么意思啊?脚本运行的时候发现半径为0.25μm时可以正常运行,但为0.75μm的时候出现一个错误: 3EO:Uk5<
Warning: in run: there was no simulation data. The simulation failed to run. jWNF3\
Error: Can not find result 'E' in the result provider 'field' w6&p4Jw/H?
代码如下: 9L7jYy=A#
radius = 1e-6*[0.25,0.75]; P5Is#7udN8
for (i=1:length(radius)) { 4IGn,D^
setnamed("::model","radius",radius(i)); X(M|T]`b:
run; _Qd CV`
E = getresult("field","E"); YE;Tpji
x = E.x; WinwPn+9
z = E.z; L)yc_ d5
Ex = E.Ex; =+ALh-
image(x*1e6,z*1e6,pinch(real(Ex)),"x (um)","z (um)","Real(Ex) - "+num2str(radius(i)*1e6)+" um"); >& `;@ZOH
switchtolayout; $*q^7ME
}