在将基准轴作为主参照,激活次参照收集器,选择模型表面为孔的放置面,设定孔为标准孔,规格为M48×5,然后单击沉孔按纽,设定沉孔深度,设定深度方式为穿透.但是好象它的表示为 : M48×5 ISO-H TAP THRO +6uOg,;
43 DRILL (1.69) THRO-(1) HOLE E=A/4p6\$
显示出的螺钉孔径竟为1.69而不是48,我不知道为何? ^sJ1 ^LT
请教高手,急盼!!! YBR)s\*
thank you for helping and dealing with the small problem, fO0-N>W'P
i glad to participate with this club and make friends . TjT](?'o
qq:287189317