切换到宽版
  • 广告投放
  • 稿件投递
  • 繁體中文
    • 3859阅读
    • 1回复

    [转载]plastic design [复制链接]

    上一主题 下一主题
    离线anvils
     
    发帖
    2
    光币
    5
    光券
    0
    只看楼主 倒序阅读 楼主  发表于: 2008-01-17
    Design Tips for Rapid Injection Molding z nc'  
    As illustrated in figure 1, draft is the angle between the direction of ejection of a part from the mold and the surface of the part. Its traditional function is to facilitate the removal of the part from the mold, but in Protomold’s Rapid Injection Molding process, it also permits deeper geometries to be milled while reducing cost and insuring trouble free molding. Drafts of 1.0 degree and larger may result in lower costs with the Rapid Injection Molding process. 3h|:ew[  
    It is important that textured surfaces have adequate draft to prevent the part from sticking in the mold and to prevent “drag” marks. Protomold requires that lightly textured surfaces (T-1) have a minimum of 3 degrees of draft and that more heavily textured surfaces (T-2) have a minimum of 5 degrees of draft. +Eh^j3W  
    Another example of the importance of draft in the manufacturability of your design is illustrated in figure 2. In this case the draft not only helps the part eject from the mold more easily, but it also minimizes the amount of sliding required between the mold’s telescoping shutoff surfaces. A minimum of 3.0 degrees of draft is required for telescoping shutoff features. \dz@hJl:  
    Draft your way to a better part mtON dI  
    ©2007 Protomold. All rights reserved. Volume 1 n Draft your way to a better part n 3 \|}dlG  
    It is important that textured surfaces have adequate draft to prevent the part from sticking in the mold and to prevent “drag” marks. '~ {xn  
    Figure 1: Draft definition. ]O\Oj6C  
    Undrafted 3+E AMn  
    Drafted 5z>kz/uxW  
    Figure 2: Draft can also improve mold life. 9(/ ;Wutj"  
    No draft results in sliding parallel mold surfaces 1E*No1  
    Draft results in improved mold shutoff surfaces a|x1aN 0  
    Top view 9O+><x[i  
    Top view
     
    分享到
    离线chengzheng
    发帖
    2278
    光币
    10
    光券
    0
    只看该作者 1楼 发表于: 2020-10-30
    不错,看看