首页 -> 登录 -> 注册 -> 回复主题 -> 发表主题
光行天下 -> FRED,VirtualLab -> 双折射材料的温度修正 [点此返回论坛查看本帖完整版本] [打印本页]

infotek 2021-08-17 10:55

双折射材料的温度修正

双折射材料的温度修正 Birefringent Material Temperature Modification RwS@I /  
'`1CBU$  
目前,FRED尚不支持“global”温度设置,温度敏感性评估一般用脚本编程来完成,该文档演示双折射材料的折射率随温度变化的问题。附件案例文件包括两个双折射材料模,“KDP”和 “KDP Baseline”, KDP Baseline材料存储在已知温度下的折射率,KDP材料用于储存在“current”温度下的折射率值,定义为与baseline material之间的温度差。一个嵌入的脚本名为“modifyBirefringentMaterialIndex” ,包含在FRED文件中,另外也单独附加。其实现过程如下: iH^z:%dP  
=^ T\Xs;GK  
1.Retrieve the node numbers for the two materials, KDP and KDP Baseline 9&RFO$WH  
oD}uOC}FS{  
2.User specifies CTE for the ordinary and extraordinary refractive index values as well as the temperature difference from the baseline wP,JjPUt  
yV)la@c  
3.Loop over the baseline material samples and determine the number of wavelength entries Scv#zuv_  
r! Ay :r  
4.Loop over each sampled wavelength entry in the baseline material fib}b? vk  
AyMd:5;  
a.Modify the ordinary and extraordinary refractive index values using (2) above QRLt9L  
!x'/9^i~v  
b.Apply the modified values to the non-baseline material )}9rwZ  
'l,V*5L  
5.Set a description on the non-baseline material indicating the temperature change from baseline ePIiF_X  
.xB u-?6s6  
脚本编程及GUI例程请下载链接: Fd*8N8Pi  
%e&9.  
http://fred-kb.photonengr.com/files/2011/04/modifyBirefringentMaterialIndex.frs %v2R.?F8  
 <T[E=#  
http://fred-kb.photonengr.com/files/2011/04/birefringentMaterialTemperatureModification.frd }^B6yWUN  
查看本帖完整版本: [-- 双折射材料的温度修正 --] [-- top --]

Copyright © 2005-2026 光行天下 蜀ICP备06003254号-1 数据分析