光学相干断层成像术(OpticalCoherenceTomography,OCT)是一种新的光学诊断技术,可进行活体眼组织显微镜结构的非接触式、非侵入性断层成像.OCT是超声的光学模似品,但其轴向分辨力取决于光源的相干特性,可达10um,且穿透深度几乎不受眼透明屈光介质的限制,可观察眼前节,又能显示眼后节的形态结构,在眼内疾病尤其是视网膜疾病的诊断,随访观察及治疗效果评价等方面具有良好的应用前景. %Ys>PzM
Sh]x`3 ).
Optical coherence tomography (OCT) is an optical signal acquisition and processing method allowing extremely high-quality, micrometre-resolution, three-dimensional images from within optical scattering media (e.g., biological tissue) to be obtained. In distinction with other optical methods, OCT, an interferometric technique, is able to penetrate significantly deeper into the scattering medium, for example ~3× deeper than its nearest competitor, Confocal microscopy. Depending on the use of high-brightness and wide-spectrum light sources such as superluminescent diodes or ultrashort pulse lasers, OCT has achieved sub-micrometre resolution (with very wide-spectrum sources emitting over a ~100 nm wavelength range). It is one of a class of optical tomographic techniques. A relatively recent implementation of OCT, frequency-domain OCT, provides advantages in signal-to-noise ratio and therefore faster signal acquisition. OCT systems, now commercially available following years of testing, are finding diverse application areas such as art conservation and diagnostic medicine (notably in ophthalmology where it permits remarkable noninvasive images to be obtained from within the retina). | pp @
WL}6YSC
Introduction .VmI4V?}h
Starting from white-light interferometry for in vivo ocular eye measurements [1] [2] imaging of biological tissue, especially of the human eye, was investigated by multiple groups worldwide. A first two-dimensional in vivo depiction of a human eye fundus along a horizontal meridian based on white light interferometric depth scans has been presented at the ICO-15 SAT conference in 1990[3]. Further developed 1990 by Naohiro Tanno [4][5], then a professor at Yamagata University, and in particular since 1991 by Huang et al.[6], optical coherence tomography (OCT) with micrometer resolution and cross-sectional imaging capabilities has become a prominent biomedical tissue-imaging technique; it is particularly suited to ophthalmic applications and other tissue imaging requiring micrometer resolution and millimeter penetration depth[7]. First in vivo OCT images – displaying retinal structures – were published in 1993. [8] [9] OCT has also been used for various art conservation projects, where it is used to analyze different layers in a painting. OCT has critical advantages over other medical imaging systems. Medical ultrasonography, magnetic resonance imaging (MRI) and confocal microscopy are not suited to morphological tissue imaging: the first two have poor resolution; the last lacks millimeter penetration depth.[10][11] 9,'5~+7
asW1GZO
OCT is based on low coherence interferometry.[12][13][14] In conventional interferometry with long coherence length (laser interferometry), interference of light occurs over a distance of meters. In OCT, this interference is shortened to a distance of micrometres, thanks to the use of broadband light sources (sources that can emit light over a broad range of frequencies). Light with broad bandwidths can be generated by using superluminescent diodes (superbright LEDs) or lasers with extremely short pulses (femtosecond lasers). White light is also a broadband source with lower powers. Wyt C c>oL
4ij`
Light in an OCT system is broken into two arms -- a sample arm (containing the item of interest) and a reference arm (usually a mirror). The combination of reflected light from the sample arm and reference light from the reference arm gives rise to an interference pattern, but only if light from both arms have travelled the "same" optical distance ("same" meaning a difference of less than a coherence length). By scanning the mirror in the reference arm, a reflectivity profile of the sample can be obtained (this is time domain OCT). Areas of the sample that reflect back a lot of light will create greater interference than areas that don't. Any light that is outside the short coherence length will not interfere. This reflectivity profile, called an A-scan, contains information about the spatial dimensions and location of structures within the item of interest. A cross-sectional tomograph (B-scan) may be achieved by laterally combining a series of these axial depth scans (A-scan). En face imaging (C-scan) at an acquired depth is possible depending on the imaging engine used. .tN)H1.:B
BPrA*u }T
nHKEtKDd
Laypersons Explanation s80_e
2a=WT`xf ?
Optical Coherence Tomography, or ‘OCT’, is a technique for obtaining sub-surface images of translucent or opaque materials at a resolution equivalent to a low-power microscope. It is effectively ‘optical ultrasound’, imaging reflections from within tissue to provide cross-sectional images. cJ8F# t
U&3*c +B4
OCT is attracting interest among the medical community, because it provides tissue morphology imagery at much higher resolution (better than 10 µm) than other imaging modalities such as MRI or ultrasound. \Zf&&7v
G>mgoN
The key benefits of OCT are: MmWJYF=
.4!N #'
Live sub-surface images at near-microscopic resolution "}SER C7
Instant, direct imaging of tissue morphology I9F[b#'Pn
No preparation of the sample or subject U-FA^ c;
No ionizing radiation @su{Uno8/
OCT delivers high resolution because it is based on light, rather than sound or radio frequency. An optical beam is directed at the tissue, and a small portion of this light that reflects from sub-surface features is collected. Note that most light is not reflected but, rather, scatters. The scattered light has lost its original direction and does not contribute to forming an image but rather contributes to glare. The glare of scattered light causes optically scattering materials (e.g., biological tissue, candle wax, or certain plastics) to appear opaque or translucent even while they do not strongly absorb light (as can be ascertained through a simple experiment — e.g., shining a red laser pointer through one's finger). Using the OCT technique, scattered light can be filtered out, completely removing the glare. Even the very tiny proportion of reflected light that is not scattered can then be detected and used to form the image in, e.g., a scanning OCT system employing a microscope. FOk @W&
Msd!4 TrBJ
The physics principle allowing the filtering of scattered light is optical coherence. Only the reflected (non-scattered) light is coherent (i.e., retains the optical phase that causes light rays to propagate in one or another direction). In the OCT instrument, an optical interferometer is used in such a manner as to detect only coherent light. Essentially, the interferometer strips off scattered light from the reflected light needed to generate an image. In the process depth and intensity of light reflected from a sub-surface feature is obtained. A three-dimensional image can be built up by scanning, as in a sonar or radar system. m]-8?B1`Y
uAj GR
Within the range of noninvasive three-dimensional imaging techniques that have been introduced to the medical research community, OCT as an echo technique is similar to ultrasound imaging. Other medical imaging techniques such as computerized axial tomography, magnetic resonance imaging, or positron emission tomography do not utilize the echo-location principle. uAvs
4G>|It
The technique is limited to imaging 1 to 2 mm below the surface in biological tissue, because at greater depths the proportion of light that escapes without scattering is too small to be detected. No special preparation of a biological specimen is required, and images can be obtained ‘non-contact’ or through a transparent window or membrane. It is also important to note that the laser output from the instruments is low – eye-safe near-infra-red light is used – and no damage to the sample is therefore likely. btOTDqG`a
Ar<OP'C
#dpt=
amBz75N{
tt^ze|*&t
